Functional evaluation of a novel fibreglass-reinforced polyamide custom dynamic AFO for foot drop patients: A pilot study.

BACKGROUND: Ankle-foot orthoses (AFOs) are orthopaedic devices often prescribed to treat foot drop. For patients who are not satisfied with off-the-shelf solutions, custom AFOs personalized to the patient's lower limb anatomy are required. Dynamic AFOs provide stability while allowing for physiological ankle mobility in the stance phase of walking. RESEARCH QUESTION: Can a morphology-based dynamic custom AFO made of fiberglass-reinforced polyamide restore a quasi-normal gait pattern and improve comfort in patients with foot drop? METHODS: In this pilot study, the legs and feet of ten foot drop patients (age=64.9 ± 11.4 years; BMI=26.2 ± 2.1 kg/m2) were scanned using a Kinect-based 3D scanner. A custom AFO was designed and produced for each patient using a fiberglass-reinforced polyamide through selective laser sintering. To assess kinematics, skin markers were placed on relevant bony landmarks according to a validated protocol. Each patient was instructed to walk at a self-selected comfortable speed under three conditions: wearing the custom AFO, wearing an off-the-shelf orthosis (Codivilla spring), and without any AFO (shod condition). Muscle activation in the tibialis anterior, gastrocnemius, rectus femoris and biceps femoris muscles in both legs was recorded using wireless sEMG sensors. The comfort and of each AFO was evaluated using a Visual Analogue Scale. RESULTS: The custom AFO resulted in significant increase of stride length and walking speed compared to the shod condition. Except for the hip joint, which exhibited greater maximum flexion and reduced range of motion, the kinematic parameters of all other joints were similar to those observed in a healthy control population. Furthermore, the custom AFO received significantly higher comfort scores compared to the Codivilla spring. SIGNIFICANCE: This study has provided evidence supporting the effectiveness of custom orthotic solutions in restoring lower limb kinematics and improving the perceived comfort in foot drop patients compared to off-the-shelf solutions.

Design and simulation of losses in Ge/SiGe terahertz quantum cascade laser waveguides.

The waveguide losses from a range of surface plasmon and double metal waveguides for Ge/Si1-xGex THz quantum cascade laser gain media are investigated at 4.79 THz (62.6 µm wavelength). Double metal waveguides demonstrate lower losses than surface plasmonic guiding with minimum losses for a 10 µm thick active gain region with silver metal of 21 cm-1 at 300 K reducing to 14.5 cm-1 at 10 K. Losses for silicon foundry compatible metals including Al and Cu are also provided for comparison and to provide a guide for gain requirements to enable lasers to be fabricated in commercial silicon foundries. To allow these losses to be calculated for a range of designs, the complex refractive index of a range of nominally undoped Si1-xGex with x = 0.7, 0.8 and 0.9 and doped Ge heterolayers were extracted from Fourier transform infrared spectroscopy measurements between 0.1 and 10 THz and from 300 K down to 10 K. The results demonstrate losses comparable to similar designs of GaAs/AlGaAs quantum cascade laser plasmon waveguides indicating that a gain threshold of 15.1 cm-1 and 23.8 cm-1 are required to produce a 4.79 THz Ge/SiGe THz laser at 10 K and 300 K, respectively, for 2 mm long double metal waveguide quantum cascade lasers with facet coatings.

Guided mode resonance flat-top bandpass filter for terahertz telecom applications.

In this work, we design and experimentally demonstrate a novel terahertz (THz) filter exhibiting a flattened spectral response in the atmospheric transmission window around the central frequency of 300 GHz. The innovative concept behind this filter is the coupling of Fabry-Perot and guided mode resonances. The latter arise from a two-dimensional patch array patterned on an aluminum layer deposited on a low loss cyclo-olefin polymer. The filter experimental performance shows high transmittance in the flat-top band, with less than 3 dB losses, and high out-of-band rejection, as theoretically expected. This kind of component provides a cost-effective, functional solution for narrowband filtering in emerging THz devices and systems with possible applications in wireless telecommunications.

Low loss Ge-on-Si waveguides operating in the 8-14 µm atmospheric transmission window.

Germanium-on-silicon waveguides were modeled, fabricated and characterized at wavelengths ranging from 7.5 to 11 µm. Measured waveguide losses are below 5 dB/cm for both TE and TM polarization and reach values of ∼ 1 dB/cm for ≥ 10 µm wavelengths for the TE polarization. This work demonstrates experimentally for the first time that Ge-on-Si is a viable waveguide platform for sensing in the molecular fingerprint spectral region. Detailed modeling and analysis is presented to identify the various loss contributions, showing that with practical techniques losses below 1 dB/cm could be achieved across the full measurement range.

High conductivity of ultrathin nanoribbons of SrRuO3 on SrTiO3 probed by infrared spectroscopy.

SrRuO3 (SRO) is a perovskite increasingly used in oxide-based electronics both for its intrinsic metallicity, which remains unaltered in thin films and for the ease of deposition on dielectric perovskites like SrTiO3, (STO) to implement SRO/STO microcapacitors and other devices. In order to test the reliability of SRO/STO also as high-current on-chip conductor, when the SRO dimensions are pushed to the nanoscale, here we have measured the electrodynamic properties of arrays of nanoribbons, fabricated by lithography starting from an ultrathin film of SRO deposited on a STO substrate. The nanoribbons are 6 or 4 nm thick, 400, 200 and 100 nm wide and 5 mm long. The measurements have been performed by infrared spectroscopy, a non-contact weakly perturbing technique which also allows one to separately determine the carrier density and their scattering rate or mobility. Far-infrared reflectivity spectra have been analyzed by Rigorous Coupled-Wave Analysis (RCWA) and by an Effective Medium Theory, obtaining consistent results. With the radiation polarized along the nanoribbons, we obtain a carrier density similar to that of a flat film used as reference, which in turn is similar to that of bulk SRO. Moreover, in the nanoribbons the carrier scattering rate is even smaller than in the unpatterned film by about a factor of 2. This shows that the transport properties of SRO deposited on STO remain at least unaltered down to nanometric dimensions, with interesting perspectives for implementing on-chip nano-interconnects in an oxide-based electronics. When excited in the perpendicular direction, the nanoribbons appear instead virtually transparent to the radiation field, as predicted by RCWA.

Boosting infrared energy transfer in 3D nanoporous gold antennas.

The applications of plasmonics to energy transfer from free-space radiation to molecules are currently limited to the visible region of the electromagnetic spectrum due to the intrinsic optical properties of bulk noble metals that support strong electromagnetic field confinement only close to their plasma frequency in the visible/ultraviolet range. In this work, we show that nanoporous gold can be exploited as a plasmonic material for the mid-infrared region to obtain strong electromagnetic field confinement, co-localized with target molecules into the nanopores and resonant with their vibrational frequency. The effective optical response of the nanoporous metal enables the penetration of optical fields deep into the nanopores, where molecules can be loaded thus achieving a more efficient light-matter coupling if compared to bulk gold. In order to realize plasmonic resonators made of nanoporous gold, we develop a nanofabrication method based on polymeric templates for metal deposition and we obtain antenna arrays resonating at mid-infrared wavelengths selected by design. We then coat the antennas with a thin (3 nm) silica layer acting as the target dielectric layer for optical energy transfer. We study the strength of the light-matter coupling at the vibrational absorption frequency of silica at 1240 cm-1 through the analysis of the experimental Fano lineshape that is benchmarked against identical structures made of bulk gold. The boost in the optical energy transfer from free-space mid-infrared radiation to molecular vibrations in nanoporous 3D nanoantenna arrays can open new application routes for plasmon-enhanced physical-chemical reactions.

Protein clustering in chemically stressed HeLa cells studied by infrared nanospectroscopy.

Photo-Thermal Induced Resonance (PTIR) nanospectroscopy, tuned towards amide-I absorption, was used to study the distribution of proteic material in 34 different HeLa cells, of which 18 were chemically stressed by oxidative stress with Na3AsO3. The cell nucleus was found to provide a weaker amide-I signal than the surrounding cytoplasm, while the strongest PTIR signal comes from the perinuclear region. AFM topography shows that the cells exposed to oxidative stress undergo a volume reduction with respect to the control cells, through an accumulation of the proteic material around and above the nucleus. This is confirmed by the PTIR maps of the cytoplasm, where the pixels providing a high amide-I signal were identified with a space resolution of ∼300 × 300 nm. By analyzing their distribution with two different statistical procedures we found that the probability to find protein clusters smaller than 0.6 µm in the cytoplasm of stressed HeLa cells is higher by 35% than in the control cells. These results indicate that it is possible to study proteic clustering within single cells by label-free optical nanospectroscopy.

Recent advances in superhydrophobic surfaces and their relevance to biology and medicine.

By mimicking naturally occurring superhydrophobic surfaces, scientists can now realize artificial surfaces on which droplets of a few microliters of water are forced to assume an almost spherical shape and an extremely high contact angle. In recent decades, these surfaces have attracted much attention due to their technological applications for anti-wetting and self-cleaning materials. Very recently, researchers have shifted their interest to investigate whether superhydrophobic surfaces can be exploited to study biological systems. This research effort has stimulated the design and realization of new devices that allow us to actively organize, visualize and manipulate matter at both the microscale and nanoscale levels. Such precise control opens up wide applications in biomedicine, as it allows us to directly manipulate objects at the typical length scale of cells and macromolecules. This progress report focuses on recent biological and medical applications of superhydrophobicity. Particular regard is paid to those applications that involve the detection, manipulation and study of extremely small quantities of molecules, and to those that allow high throughput cell and biomaterial screening.

Mapping the amide I absorption in single bacteria and mammalian cells with resonant infrared nanospectroscopy.

Infrared (IR) nanospectroscopy performed in conjunction with atomic force microscopy (AFM) is a novel, label-free spectroscopic technique that meets the increasing request for nano-imaging tools with chemical specificity in the field of life sciences. In the novel resonant version of AFM-IR, a mid-IR wavelength-tunable quantum cascade laser illuminates the sample below an AFM tip working in contact mode, and the repetition rate of the mid-IR pulses matches the cantilever mechanical resonance frequency. The AFM-IR signal is the amplitude of the cantilever oscillations driven by the thermal expansion of the sample after absorption of mid-IR radiation. Using purposely nanofabricated polymer samples, here we demonstrate that the AFM-IR signal increases linearly with the sample thickness t for t > 50 nm, as expected from the thermal expansion model of the sample volume below the AFM tip. We then show the capability of the apparatus to derive information on the protein distribution in single cells through mapping of the AFM-IR signal related to the amide-I mid-IR absorption band at 1660 cm(-1). In Escherichia Coli bacteria we see how the topography changes, observed when the cell hosts a protein over-expression plasmid, are correlated with the amide I signal intensity. In human HeLa cells we obtain evidence that the protein distribution in the cytoplasm and in the nucleus is uneven, with a lateral resolution better than 100 nm.

Load along the tibial shaft during activities of daily living.

External load at the tibia during activities of daily living provides baseline measures for the improvement of the design of the bone-implant interface for relevant internal and external prostheses. A motion analysis system was used together with an established protocol with skin markers to estimate three-dimensional forces and moments acting on ten equidistant points along the tibial shaft. Twenty young and able-bodied volunteers were analysed while performing three repetitions of the following tasks: level walking at three different speeds, in a straight-line and with sudden changes of direction to the right and to the left, stair ascending and descending, squatting, rising from a chair and sitting down. Moment and force patterns were normalised to the percentage of body weight per height and body weight, respectively, and then averaged over all subjects for each point, about the three tibial anatomical axes, and for each task. Load patterns were found to be consistent over subjects, but different among the anatomical axes, tasks and points. Generally, moments were higher in the medio/lateral axis and influenced by walking speed. In all five walking tasks and in ascending stairs with alternating feet, the more proximal the point was the smaller the mean moment was. For the remaining tasks the opposite trend was observed. The overall largest value was observed in the medio/lateral direction at the ankle centre in level walking at high speed (9.1% body weight * height on average), nearly three times larger than that of the anterior/posterior axis (2.9) during level walking with a sidestep turn. The present results should be of value also for in-vitro mechanical tests and finite element models.

Intrinsic linewidth of the plasmonic resonance in a micrometric metal mesh.

The intrinsic linewidth and angular dispersion of Surface Plasmon Polariton resonance of a micrometric metal mesh have been measured with a collimated mid-infrared beam, provided by an External Cavity tunable Quantum Cascade Laser. We show that the use of a collimated beam yields an observed resonance linewidth γ = 12 cm(-1) at the resonance frequency ν0 = 1658 cm(-1), better by an order of magnitude than with a non-collimated beam. The extremely narrow plasmon resonance attained by our mesh is then exploited to reconstruct, by varying the QCL angle of incidence θ, the angular intensity distribution f(θ) of a globar at the focal plane of a conventional imaging setup. We thus show that f(θ) is better reproduced by a Gaussian distribution than by a uniform one, in agreement with ray-tracing simulation.

Load along the femur shaft during activities of daily living.

A comprehensive knowledge of the loads applied during activities of daily living to the femur shaft is necessary to the design of direct attachments of relevant prostheses. A motion analysis system was used together with an established protocol with skin markers to estimate the three components of the forces and moments acting on ten equidistant points along the full femur shaft. Twenty healthy young volunteers were analyzed while performing three repetitions of the following tasks: level walking at three different speeds, straight-line and with sudden changes of direction to the right and to the left, stairs ascending and descending, squat, rising from a chair and sitting down. Average load patterns, after normalisation for body weight and height, were calculated over subjects for each point, about the three anatomical axes, and for each motor task. These patterns were found consistent over subjects, but different among the anatomical axes and tasks. In general, the moments were observed limitedly influenced by the progression speed, and higher for more proximal points. The moments were also higher in abd/adduction (8.1% body weight*height on average), nearly three times larger than those in flex/extension (2.6) during stair descending. The largest value over all moments was 164.8 N m, abd/adduction in level walking at high speed. The present results should be of value also for a most suitable level for amputation in transfemoral amputation, for in-vitro mechanical tests and for finite element models of the femur.

Observation of Dirac plasmons in a topological insulator.

Plasmons are quantized collective oscillations of electrons and have been observed in metals and doped semiconductors. The plasmons of ordinary, massive electrons have been the basic ingredients of research in plasmonics and in optical metamaterials for a long time. However, plasmons of massless Dirac electrons have only recently been observed in graphene, a purely two-dimensional electron system. Their properties are promising for novel tunable plasmonic metamaterials in the terahertz and mid-infrared frequency range. Dirac fermions also occur in the two-dimensional electron gas that forms at the surface of topological insulators as a result of the strong spin-orbit interaction existing in the insulating bulk phase. One may therefore look for their collective excitations using infrared spectroscopy. Here we report the first experimental evidence of plasmonic excitations in a topological insulator (Bi2Se3). The material was prepared in thin micro-ribbon arrays of different widths W and periods 2W to select suitable values of the plasmon wavevector k. The linewidth of the plasmon was found to remain nearly constant at temperatures between 6 K and 300 K, as expected when exciting topological carriers. Moreover, by changing W and measuring the plasmon frequency in the terahertz range versus k we show, without using any fitting parameter, that the dispersion curve agrees quantitatively with that predicted for Dirac plasmons.

Narrow intersubband transitions in n-type Ge/SiGe multi-quantum wells: control of the terahertz absorption energy trough the temperature dependent depolarization shift.

In this paper we present a detailed study of the intersubband absorption occurring between electron states confined in strained Ge multi-quantum wells as a function of the temperature. The high structural quality of the samples is reflected by the very narrow absorption line-shape constant with temperature. We observe a temperature driven charge transfer occurring between the ground and the first excited subband which, in turn, induces a change in the depolarization shift and consequently in the energy of the absorbance peak. The experimental observations are well accounted for by a multi-valley k·p model.

Autophagic degradation of farnesylated prelamin A as a therapeutic approach to lamin-linked progeria.

Farnesylated prelamin A is a processing intermediate produced in the lamin A maturation pathway. Accumulation of a truncated farnesylated prelamin A form, called progerin, is a hallmark of the severe premature ageing syndrome, Hutchinson-Gilford progeria. Progerin elicits toxic effects in cells, leading to chromatin damage and cellular senescence and ultimately causes skin and endothelial defects, bone resorption, lipodystrophy and accelerated ageing. Knowledge of the mechanism underlying prelamin A turnover is critical for the development of clinically effective protein inhibitors that can avoid accumulation to toxic levels without impairing lamin A/C expression, which is essential for normal biological functions. Little is known about specific molecules that may target farnesylated prelamin A to elicit protein degradation. Here, we report the discovery of rapamycin as a novel inhibitor of progerin, which dramatically and selectively decreases protein levels through a mechanism involving autophagic degradation. Rapamycin treatment of progeria cells lowers progerin, as well as wild-type prelamin A levels, and rescues the chromatin phenotype of cultured fibroblasts, including histone methylation status and BAF and LAP2alpha distribution patterns. Importantly, rapamycin treatment does not affect lamin C protein levels, but increases the relative expression of the prelamin A endoprotease ZMPSTE24. Thus, rapamycin, an antibiotic belonging to the class of macrolides, previously found to increase longevity in mouse models, can serve as a therapeutic tool, to eliminate progerin, avoid farnesylated prelamin A accumulation, and restore chromatin dynamics in progeroid laminopathies.

Molecular identification of naturally occurring bacteriocinogenic and bacteriocinogenic-like lactic acid bacteria in raw milk and soft cheese.

Lactic acid bacteria (LAB) are currently used by food industries because of their ability to produce metabolites with antimicrobial activity against gram-positive pathogens and spoilage microorganisms. The objectives of this study were to identify naturally occurring bacteriocinogenic or bacteriocinogenic-like LAB in raw milk and soft cheese and to detect the presence of nisin-coding genes in cultures identified as Lactococcus lactis. Lactic acid bacteria cultures were isolated from 389 raw milk and soft cheese samples and were later characterized for the production of antimicrobial substances against Listeria monocytogenes. Of these, 58 (14.9%) LAB cultures were identified as antagonistic; the nature of this antagonistic activity was then characterized via enzymatic tests to confirm the proteinaceous nature of the antimicrobial substances. In addition, 20 of these antagonistic cultures were selected and submitted to genetic sequencing; they were identified as Lactobacillus plantarum (n=2) and Lactococcus lactis ssp. lactis (n=18). Nisin genes were identified by polymerase chain reaction in 7 of these cultures. The identified bacteriocinogenic and bacteriocinogenic-like cultures were highly variable concerning the production and activity of antimicrobial substances, even when they were genetically similar. The obtained results indicated the need for molecular and phenotypic methodologies to properly characterize bacteriocinogenic LAB, as well as the potential use of these cultures as tools to provide food safety.

Far-infrared absorption and the metal-to-insulator transition in hole-doped cuprates.

By studying the optical conductivity of Bi(2)Sr(2-x)La(x)CuO(6) and Y(0.97)Ca(0.03)Ba(2)Cu(3)O(6), we show that the metal-to-insulator transition in these hole-doped cuprates is driven by the opening of a small gap at low T in the far infrared. Its width is consistent with the observations of angle-resolved photoemission spectroscopy in other cuprates, along the nodal line of the k space. The gap forms as the Drude term turns into a far-infrared absorption, whose peak frequency can be approximately predicted on the basis of a Mott-like transition. Another band in the midinfrared softens with doping but is less sensitive to the metal-to-insulator transition.

Observation of charge-density-wave excitations in manganites.

In the optical conductivity of four different manganites with commensurate charge order (CO), strong peaks appear in the meV range below the ordering temperature T_{CO}. They are similar to those reported for one-dimensional charge density waves (CDW) and are assigned to pinned phasons. The peaks and their overtones allow one to obtain, for La_{1-n/8}Ca_{n/8}MnO_{3} with n=5, 6, the electron-phonon coupling, the effective mass of the CO system, and its contribution to the dielectric constant. These results support a description of the CO in La-Ca manganites in terms of moderately weak coupling and of the CDW theory.

Listeria monocytogenes and Salmonella spp. in raw milk produced in Brazil: occurrence and interference of indigenous microbiota in their isolation and development.

This study aimed to verify the occurrence of Listeria monocytogenes and Salmonella spp. in raw milk produced in Brazil. On account of the poor microbiological quality of this product, possible interference from the indigenous microbiota in these pathogens was also evaluated. Two-hundred and ten raw milk samples were collected in four important milk-producing areas in Brazil, tested for L. monocytogenes and Salmonella spp. presence, and for enumeration of indicator microorganisms: mesophilic aerobes, total coliforms and Escherichia coli. The interference of the indigenous microbiota in the isolation procedures was also tested, as well the frequency of naturally occurring raw milk strains with antagonistic activity against both pathogens. The pathogens were not isolated in any raw milk sample, but poor microbiological quality was confirmed by the high levels of indicator microorganisms. When present at high levels, the indigenous microbiota generated an evident interference in the methodologies of L. monocytogenes and Salmonella spp. isolation, mainly when the pathogens appeared at low levels. Three-hundred and sixty raw milk strains were tested for antagonistic activity against both pathogens, and 91 (25.3%) showed inhibitory activity against L. monocytogenes and 33 (9.2%) against Salmonella spp. The majority of the antagonistic strains were identified as Lactic Acid Bacteria species, mainly Lactococcus lactis subsp. lactis and Enterococcus faecium, known by antimicrobial substance production.

Nutritional recommendation alone does not change the obesity profile of health professionals.

OBJECTIVE: To evaluate the frequency of overweight and obesity in health professionals, before and after a single specialized dietary recommendation. METHODS: Anthropometric measures of 579 workers of a general hospital in the city of São Paulo, Brazil were taken. The weight (f), height (h) and waist circunference (wc) were interpreted according to the WHO and NCEP ATP III guidelines. Nutrition specialist provided dietary and behavioral recommendations. The entire sample underwent a new evaluation one year later. RESULTS: At the first evaluation, 79 employees presente WC > or = 102 cm (male) or WC > or = 88 cm (female). The association between WC > or = 102 cm (men) or WC > or = 88 cm (women) and BMI > or = 30 kg/m2 was found in 12.8% (69 subjects). The BMI distribution per age group indicated that the increase in overweight and obesity was directly proportional to the age increase. Physical activities were not practiced by 75% of the subjects studied. A year later, the evaluation indicated lack of statistical differences regarding the BMI and waist circumference of the sample and only 2.8% started to practice a physical activity. CONCLUSION: Dietary recommendation alone failed to promote changes in the eating habits of health professionals who work at a general hospital or to encourage them to practice exercise.